Mechanisms of the Drug Penetration Enhancer Propylene Glycol Interacting with Skin Lipid Membranes.

Very few drugs have the necessary physicochemical properties to cross the skin's main permeability barrier, the stratum corneum (SC), in sufficient amounts. Propylene glycol (PG) is a chemical penetration enhancer that could be included in topical formulations in order to overcome the barrier properties of the skin and facilitate the transport of drugs across it. Experiments have demonstrated that PG increases the mobility and disorder of SC lipids and may extract cholesterol from the SC, but little is known about the molecular mechanisms of drug permeation enhancement by PG. In this work, we have performed molecular dynamics (MD) simulations to investigate the molecular-level effects of PG on the structure and properties of model SC lipid bilayers. The model bilayers were simulated in the presence of PG concentrations over the range of 0-100% w/w PG, using both an all-atom and a united atom force field. PG was found to localize in the hydrophilic headgroup regions at the bilayer interface, to occupy the lipid-water hydrogen-bonding sites, and to slightly increase lipid tail disorder in a concentration-dependent manner. We showed with MD simulation that PG enhances the permeation of small molecules such as water by interacting with the bilayer interface; the results of our study may be used to guide the design of formulations for transdermal drug delivery with enhanced skin permeation, as well as topical formulations and cosmetic products.

The effect of three additives on properties of mineral trioxide aggregate cements: a systematic review and meta-analysis of in vitro studies.

BACKGROUND: Several efforts have been made to improve mechanical and biological properties of calcium silicate-based cements through changes in chemical composition of the materials. This study aimed to investigate the physical (including setting time and compressive strength) and chemical (including calcium ion release, pH level) properties as well as changes in cytotoxicity of mineral trioxide aggregate (MTA) after the addition of 3 substances including CaCl2, Na2HPO4, and propylene glycol (PG). METHODS: The systematic review was conducted in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). Electronic searches were performed on PubMed, Embase, and Scopus databases, spanning from 1993 to October 2023 in addition to manual searches. Relevant laboratory studies were included. The quality of the included studies was assessed using modified ARRIVE criteria. Meta-analyses were performed by RevMan statistical software. RESULTS: From the total of 267 studies, 24 articles were included in this review. The results of the meta-analysis indicated that addition of PG increased final setting time and Ca2+ ion release. Addition of Na2HPO4 did not change pH and cytotoxicity but reduced the final setting time. Incorporation of 5% CaCl2 reduced the setting time but did not alter the cytotoxicity of the cement. However, addition of 10% CaCl2 reduced cell viability, setting time, and compressive strength. CONCLUSION: Inclusion of 2.5% wt. Na2HPO4 and 5% CaCl2 in MTA can be advisable for enhancing the physical, chemical, and cytotoxic characteristics of the admixture. Conversely, caution is advised against incorporating elevated concentrations of PG due to its retarding effect. TRIAL REGISTRATION: PROSPERO registration number: CRD42021253707.

In vitro toxicological evaluation of aerosols generated by a 4th generation vaping device using nicotine salts in an air-liquid interface system.

BACKGROUND: Electronic cigarettes (EC) have gained popularity, especially among young people, with the introduction of fourth-generation devices based on e-liquids containing nicotine salts that promise a smoother vaping experience than freebase nicotine. However, the toxicological effects of nicotine salts are still largely unknown, and the chemical diversity of e-liquids limits the comparison between different studies to determine the contribution of each compound to the cytotoxicity of EC aerosols. Therefore, the aim of this study was to evaluate the toxicological profile of controlled composition e-liquid aerosols to accurately determine the effects of each ingredient based on exposure at the air-liquid interface. METHODS: Human lung epithelial cells (A549) were exposed to undiluted aerosols of controlled composition e-liquids containing various ratios of propylene glycol (PG)/vegetable glycerin (VG) solvents, freebase nicotine, organic acids, nicotine salts, and flavoured commercial e-liquids. Exposure of 20 puffs was performed at the air-liquid interface following a standard vaping regimen. Toxicological outcomes, including cytotoxicity, inflammation, and oxidative stress, were assessed 24 h after exposure. RESULTS: PG/VG aerosols elicited a strong cytotoxic response characterised by a 50% decrease in cell viability and a 200% increase in lactate dehydrogenase (LDH) production, but had no effects on inflammation and oxidative stress. These effects occurred only at a ratio of 70/30 PG/VG, suggesting that PG is the major contributor to aerosol cytotoxicity. Both freebase nicotine and organic acids had no greater effect on cell viability and LDH release than at a 70/30 PG/VG ratio, but significantly increased inflammation and oxidative stress. Interestingly, the protonated form of nicotine in salt showed a stronger proinflammatory effect than the freebase nicotine form, while benzoic acid-based nicotine salts also induced significant oxidative stress. Flavoured commercial e-liquids was found to be cytotoxic at a threshold dose of ≈ 330 µg/cm². CONCLUSION: Our results showed that aerosols of e-liquids consisting only of PG/VG solvents can cause severe cytotoxicity depending on the concentration of PG, while nicotine salts elicit a stronger pro-inflammatory response than freebase nicotine. Overall, aerosols from fourth-generation devices can cause different toxicological effects, the nature of which depends on the chemical composition of the e-liquid.

Enhancement of Benzene Emissions in Special Combinations of Electronic Nicotine Delivery System Liquid Mixtures.

Electronic nicotine delivery systems (ENDS) are battery-powered devices introduced to the market as safer alternatives to combustible cigarettes. Upon heating the electronic liquid (e-liquid), aerosols are released, including several toxicants, such as volatile organic compounds (VOCs). Benzene has been given great attention as a major component of the VOCs group as it increases cancer risk upon inhalation. In this study, several basic e-liquids were tested for benzene emissions. The Aerosol Lab Vaping Instrument was used to generate aerosols from ENDS composed of different e-liquid combinations: vegetable glycerin (VG), propylene glycol (PG), nicotine (nic), and benzoic acid (BA). The tested mixtures included PG, PG + nic + BA, VG, VG + nic + BA, 30/70 PG/VG, and 30/70 PG/VG + nic + BA. A carboxen polydimethylsiloxane fiber for a solid-phase microextraction was placed in a gas cell to trap benzene emitted from a Sub-Ohm Minibox C device. Benzene was adsorbed on the fiber during the puffing process and for an extra 15 min until it reached equilibrium, and then it was determined using gas chromatography-mass spectrometry. Benzene was quantified in VG but not in PG or the 30/70 PG/VG mixtures. However, benzene concentration increased in all tested mixtures upon the addition of nicotine benzoate salt. Interestingly, benzene was emitted at the highest concentration when BA was added to PG. However, lower concentrations were found in the 30/70 PG/VG and VG mixtures with BA. Both VG and BA are sources of benzene. Enhanced emissions, however, are mostly noticeable when BA is mixed with PG and not VG.

Effects of Sodium Salts of Fatty Acids and Their Derivatives on Skin Permeation of Cromolyn Sodium.

Atopic dermatitis is a chronic inflammatory disorder with rising prevalence. The safety concerns over usually used steroids are driving the need for developing an effective atopic dermatitis treatment. The use of therapeutic agents such as cromolyn sodium (CS) is suggested. However, due to its physicochemical properties, CS permeation across the skin is a challenge. The aim of this study was to investigate the effect of sodium salts of fatty acids or their derivatives with varied carbon chain lengths as potential enhancers on the skin permeation of CS. These included sodium caprylate, salcaprozate sodium, sodium decanoate, sodium palmitate, and sodium oleate dissolved in propylene glycol along with CS (4% w/w). In vitro permeation of the formulations across the dermatomed porcine ear skin was investigated over 24 h using Franz Diffusion cells. The amount of CS permeation from propylene glycol was 5.54 ± 1.06 µg/cm2 after 24 h. Initial screening of enhancers (enhancer: drug::1:1) showed enhancement in permeation of CS using sodium oleate and sodium caprylate, which were then investigated in higher ratio of drug: enhancer (1:2). Among all the formulations tested, sodium oleate (enhancer: drug::1:2) was observed to significantly (p < 0.05) enhance the permeation of CS with the highest total delivery of 359.79 ± 78.92 µg/cm2 across skin in 24 h and higher drug retention in the skin layers (153.0 ± 24.93 µg/cm2) as well. Overall, sodium oleate was found to be the most effective enhancer followed by sodium caprylate for improving the topical delivery of CS.

Deep Eutectic Solvents Based on Carboxylic Acids and Glycerol or Propylene Glycol as Green Media for Extraction of Bioactive Substances from Chamaenerion angustifolium (L.) Scop.

Chamaenerion angustifolium (L.) Scop. is one of the promising sources of biologically active compounds and a valuable industrial crop. Recently, green extraction methods have become more topical. One of them is the application of deep eutectic solvents (DESs). The aim of this work was the synthesis and characterization of DES consisting of glycerin or propylene glycol with malonic, malic, or citric acids, evaluation of their effectiveness for extracting useful substances from C. angustifolium during ultrasonic extraction, description of kinetics, and optimization of extraction conditions. DESs were obtained and characterized with FTIR. Their effectiveness in the process of ultrasound-assisted extraction of biologically active substances from C. angustifolium was estimated. Kinetic parameters describing the dependence of the total phenolic, flavonoids, and antioxidant content, free radical scavenging of DPPH, and concentration of flavonoid aglycons (myricetin, quercetin, and kaempferol) via time in the range of 5-60 min at 45 °C are obtained. Extraction conditions were optimized with the Box-Behnken design of experiment. The results of this work make it possible to expand the scope of DES applications and serve the development of C. angustifolium processing methods.

Kinetic Growth of Multicomponent Microcompartment Shells.

An important goal of systems and synthetic biology is to produce high value chemical species in large quantities. Microcompartments, which are protein nanoshells encapsulating catalytic enzyme cargo, could potentially function as tunable nanobioreactors inside and outside cells to generate these high value species. Modifying the morphology of microcompartments through genetic engineering of shell proteins is one viable strategy to tune cofactor and metabolite access to encapsulated enzymes. However, this is a difficult task without understanding how changing interactions between the many different types of shell proteins and enzymes affect microcompartment assembly and shape. Here, we use multiscale molecular dynamics and experimental data to describe assembly pathways available to microcompartments composed of multiple types of shell proteins with varied interactions. As the average interaction between the enzyme cargo and the multiple types of shell proteins is weakened, the shell assembly pathway transitions from (i) nucleating on the enzyme cargo to (ii) nucleating in the bulk and then binding the cargo as it grows to (iii) an empty shell. Atomistic simulations and experiments using the 1,2-propanediol utilization microcompartment system demonstrate that shell protein interactions are highly varied and consistent with our multicomponent, coarse-grained model. Furthermore, our results suggest that intrinsic bending angles control the size of these microcompartments. Overall, our simulations and experiments provide guidance to control microcomparmtent size and assembly by modulating the interactions between shell proteins.

Quantifying PG : VG ratio and nicotine content in commercially available e-liquids using handheld Raman spectroscopy.

Electronic cigarettes are a popular nicotine consumption product that have risen in popularity as an alternative to cigarettes. However, their recent meteoric rise in market size and various controversies have resulted in the analyses of e-liquid ingredients to be focused on powerful laboratory-based slow methods such as chromatography and mass spectrometry. Here we present a complementary technology based on Raman spectroscopy combined with chemometrics as a fast, inexpensive, and highly portable screening tool to detect and quantify the propylene glycol : glycerol (PG : VG) ratio and nicotine content of e-cigarette liquids. Through this, the PG : VG ratio of 20 out of 23 commercial samples was quantified to within 3% of their stated value, while nicotine was successfully quantified to within 1 mg g-1 for 16 out of 23 samples without the need for accurate knowledge of flavonoid composition. High linearity was also achieved when flavours were kept constant. Finally, the limitations of Raman spectroscopy are discussed, and potential solutions are suggested.

A Quick Method for the Determination of the Fraction of Freebase Nicotine in Electronic Cigarettes.

Recently, many electronic cigarettes (ECIGs) manufacturers have begun offering e-liquids, known as "nicotine salts". These salts that have started gaining big popularity among users can be formed by adding weak acid to e-liquid mixtures consisting of propylene glycol (PG), vegetable glycerin (VG), flavors, and nicotine. The latter can exist in two forms: monoprotonated (mp) and freebase (fb) based on the pH of the matrix. Over the years, the determination of the fraction of fb was found important to policymakers as the prevalence of this form in ECIGs has been associated with the harshness sensory of inhalable aerosols. Liquid-liquid extraction (LLE), 1H NMR, and Henderson-Hasselback have been developed to deduce the fraction of fb; however, these methods were found to be time-consuming and have shown some challenges mainly due to the presence of a non-aqueous matrix consisting of PG and VG. This paper presents a quick non-aqueous pH measurement-based method that allows a quick determination of the fraction fb by just measuring the pH and the dielectric constant of the e-liquid. Then, by inputting these values into an established mathematical relationship, the fraction fb can be deduced. The relationship between pH, dielectric constant, and fb relies on knowing the values of the acidity dissociation constants of nicotine, which were determined for the first time in various PG/VG mixtures using a non-aqueous potentiometric titration. To validate the proposed method, the fraction fb was determined for commercials and lab-made nicotine salts utilizing the pH and LLE methods. The variation between the two methods was (<8.0%) for commercial e-liquids and lab-made nicotine salts containing lactic acid and salicylic acid. A larger discrepancy of up to 22% was observed for lab-made nicotine salts containing benzoic acid, which can be attributed to the stronger affinity of benzoic acid to toluene in the LLE method.

An in vitro evaluation of e-vapor products: The contributions of chemical adulteration, concentration, and device power.

Homemade e-liquids and power-adjustable vaping devices may carry higher risks than commercial formulations and fixed-power devices. This study used human macrophage-like and bronchial epithelial (NHBE) cell cultures to investigate toxicity of homemade e-liquids containing propylene glycol and vegetable glycerin (PG/VG), nicotine, vitamin E acetate (VEA), medium-chain fatty acids (MCFAs), phytol, and cannabidiol (CBD). SmallAir™ organotypic epithelial cultures were exposed to aerosols generated at different power settings (10-50 W). Carbonyl levels were measured, and endpoints reflecting epithelial function (ciliary beating frequency [CBF]), integrity (transepithelial electrical resistance [TEER]), and structure (histology) were investigated. Treatment with nicotine or VEA alone or with PG/VG did not impact cell viability. CBD, phytol, and lauric acid caused cytotoxicity in both culture systems and increased lipid-laden macrophages. Exposure of SmallAir™ organotypic cultures to CBD-containing aerosols resulted in tissue injury and loss of CBF and TEER, while PG/VG alone or with nicotine or VEA did not. Aerosols generated with higher power settings had higher carbonyl concentrations. In conclusion, the presence and concentration of certain chemicals and device power may induce cytotoxicity in vitro. These results raise concerns that power-adjustable devices may generate toxic compounds and suggest that toxicity assessments should be conducted for both e-liquid formulations and their aerosols.

Skin permeation of curcumin nanocrystals: Effect of particle size, delivery vehicles, and permeation enhancer.

Nanocrystals are characterized by high drug loading, low carrier toxicity, and great structural stability. Therefore, they are a promising and versatile strategy for enhancing the local delivery of insoluble drugs. They achieve this by improving skin adhesion, concentration gradients, and hair follicle accumulation, as well as generating corona diffusion (which forms through the overlap of dissolved drug molecules around a nanocrystal). The development of suitable formulations for enhancing the passive diffusion and/or follicular targeting of nanocrystals is of great importance to clinical practice. We sought to elucidate the influence of particle size, a penetration enhancer, and delivery vehicles on the follicular accumulation and passive dermal permeation of nanocrystals. For this purpose, curcumin nanocrystals (particle size: 60, 120, and 480 nm) were incorporated into xanthan gum gels (delivery vehicles) with propylene glycol (penetration enhancer). This evaluation was performed in a porcine skin model. The results showed that xanthan gum reduced the follicular penetration and passive skin accumulation of curcumin nanocrystals. The propylene glycol enhanced the skin penetration and retention of curcumin nanocrystals in vitro for 24 h. The curcumin nanocrystals of smaller particle size (i.e., 60 and 120 nm) displayed higher passive skin penetration versus those with larger particle size (i.e., 480 nm); however, the latter type showed deeper follicular accumulation. In conclusion, the delivery vehicles, penetration enhancer, and particle sizes examined in this study affect the dermal penetration and accumulation of curcumin nanocrystals. Hence, their effects should be adequately considered when designing formulations of such nanocrystals.

Two Fast GC-MS Methods for the Measurement of Nicotine, Propylene Glycol, Vegetable Glycol, Ethylmaltol, Diacetyl, and Acetylpropionyl in Refill Liquids for E-Cigarettes.

The use of e-cigarettes (ECs) has become increasingly popular worldwide, even though scientific results have not established their safety. Diacetyl (DA) and acetylpropionyl (AP), which can be present in ECs, are linked with lung diseases. Ethyl maltol (EM)-the most commonly used flavoring agent-can be present in toxic concentrations. Until now, there is no methodology for the determination of nicotine, propylene glycol (PG), vegetable glycerin (VG), EM, DA, and acetylpropionyl in e-liquids that can be used as a quality control procedure. Herein, gas chromatography coupled with mass spectrometry (GC-MS) was applied for the development of analytical methodologies for these substances. Two GC-MS methodologies were developed and fully validated, fulfilling the standards for the integration in a routine quality control procedure by manufacturers. As proof of applicability, the methodology was applied for the analysis of several e-liquids. Differences were observed between the labeled and the experimental levels of PG, VG, and nicotine. Three samples contained EM at higher concentrations compared to the other samples, while only one contained DA. These validated methodologies can be used for the quality control analysis of EC liquid samples regarding nicotine, PG, and VG amounts, as well as for the measurement of the EM.

A Wide Range of Flavoring-Carrier Fluid Adducts Form in E-Cigarette Liquids.

A range of flavoring molecules are used in electronic cigarette liquids (e-liquids), some of which have been shown to form cyclic acetal adducts with e-liquid solvent components propylene glycol (PG) and vegetable glycerine (VG). The objective of this study was to identify the range of flavoring molecules which form adducts in e-liquid products. Common e-liquid flavoring molecules (N = 36) from a range of chemical class groups were exposed to PG, VG, or methanol and analyzed by GC-MS over a time frame of 4 weeks to identify possible reaction products. Adduct formation was observed, with 14 of the flavoring molecules reacting with methanol, 10 reacting with PG, and 10 reacting with VG. Furfural PG and VG acetals, valeraldehyde PG and VG acetals, veretraldehyde PG and VG acetals, p-anisaldehyde PG and VG acetals, and piperonal VG acetal were confirmed for the first time. Adducts formed by reaction with ketone-containing flavoring molecules were also observed for the first time. The presence of these acetals was confirmed in 32% of commercial e-liquid products analyzed (N = 142). This study has established a range of flavoring molecules which are able to react with solvent components PG and VG in e-liquids under standard storage conditions. These newly identified adducts need to be further assessed to determine their toxicological safety.

Microemulsion Delivery Systems with Low Surfactant Concentrations: Optimization of Structure and Properties by Glycol Cosurfactants.

Extensive use of microemulsions as delivery systems raises interest in the safe ingredients that can form such systems. Here, we assessed the use of two glycols, i.e., propylene glycol and pentylene glycol, and their mixtures to manipulate the properties and structure of microemulsions. Obtained systems with glycols were extensively characterized in terms of capacity to incorporate water phase, droplet size, polydispersity, structure type, and rheological and thermal properties. The results of these studies indicate that the composition, structure, and viscosity of the microemulsions can be changed by appropriate quantification of glycols. It has been shown that the type of glycol used and its amount may favor or worsen the formation of microemulsions with the selected oils. In addition, a properly selected composition of oils and glycols resulted in the formation of microemulsions with a reduced content of surfactants and consequently improved the safety of using microemulsions as delivery systems.

In Situ-Generated, Dispersed Cu Catalysts for the Catalytic Hydrogenolysis of Glycerol.

The present study is dedicated to the experimental verification of a concept for the hydrogenolysis of glycerol over in situ-generated Cu dispersed particles (Cu-DP). The Cu-DP were generated by in situ reduction of a precursor salt (Cu(OAc)2, CuSO4, CuCl2) in the presence of KOH and were active in glycerol conversion under hydrogen (T = 200-220 °C, p(H2) = 1-4 MPa), where 1,2-propylene glycol (PG) and lactic acid (LA) were detected to be the main products. The influence of the reaction conditions (temperature, hydrogen pressure, reaction time, catalyst-to-feed ratio and the KOH/Cu ratio) on the yields of the products is described. It was shown that the selectivity between the PG and LA could be tuned by changing p(H2) or by the KOH amount, i.e., higher yields of LA corresponded to lower p(H2) and higher alkalinity of the reaction media. The activity of the in situ-generated Cu-DP was found to be comparable to that of an industrial Cu-Cr2O3 catalyst. The Cu-DP catalysts were characterized by XRD, XPS, HRTEM and SEM. During the reaction, the catalyst evolved by the sintering and recrystallization of the separate Cu-DP; the crystallite sizes after 1 and 15 h reaction times amounted to 35 and 49 nm, respectively.

Evidence for the coupling of refill liquids content and new particle formation in electronic cigarette vapors.

The size and chemical content of particles in electronic cigarette vapors (e-vapors) dictate their fate in the human body. Understanding how particles in e-vapors are formed and their size is critical to identifying and mitigating the adverse consequences of vaping. Thermal decomposition and reactions of the refill liquid (e-liquid) components play a key role in new particles formation. Here we report the evolution of particle number concentration in e-vapors over time for variable mixtures of refill e-liquids and operating conditions. Particle with aerodynamic diameter < 300 nm accounted for up to 17% (or 780 µg/m3) of e-vapors particles. Two events of increasing particle number concentration were observed, 2-3 s after puff completion and a second 4-5 s later. The intensity of each event varied by the abundance of propylene glycol, glycerol, and flavorings in e-liquids. Propylene glycol and glycerol were associated with the first event. Flavorings containing aromatic and aliphatic unsaturated functional groups were strongly associated with the second event and to a lesser extent with the first one. The results indicate that particles in e-vapors may be formed through the heteromolecular condensation of propylene glycol, glycerol, and flavorings, including both parent chemicals and/or their thermal decomposition products.

A Lipid-Based In Situ-Forming Hexagonal Phase for Prolonged Retention and Drug Release in the Breast Tissue.

In this study, the addition of monoolein to phosphatidylcholine (PC), tricaprylin, and propylene glycol (PG) mixtures was studied to produce fluid precursor formulations (FIPs) that could transform into hexagonal phase (resistant to aqueous dilution) in vitro and in vivo. The overall goal was to obtain FIPs that could incorporate chemopreventive drugs for subcutaneous administration in the mammary tissue to inhibit the development and/or recurrence of breast cancer. Increasing PG content reduced FIP viscosity up to ~ 2.5-fold, while increases in PC (over monoolein) increased the formation of emulsified systems. The hexagonal phase was observed at 20% of water and higher, with the minimum amount of water necessary for this formation increasing with PG content. The selected FIP formed a depot in vivo after ~ 24 h of administration; its structure was compatible with the hexagonal phase and it remained in the mammary tissue for at least 30 days, prolonging the permanence of a fluorescent probe. In vitro, the release of the synthetic retinoid fenretinide was slow, with ~ 9% of the drug released in 72 h. Consistent with this slow release, fenretinide IC50 in breast cancer cells was ~ 100-fold higher in the selected FIP compared to its solution. The FIP reduced cell migration and presented higher cytotoxicity towards tumor compared to non-tumor cells. Given the limited number of options for pharmacological prevention of breast cancer development and recurrences, this formulation could potentially find applicability to reduce the frequency of administration and improve local concentrations of chemopreventive drugs.

Medicated lacquer for application on adornments to treat affections in aesthetic perforations.

Aesthetic perforations are often associated with health issues, such as itching, inflammation, or microbial infection. Accordingly, this work proposed a lacquer to be applied on the adornment accessory forming a film from which a proper drug is released. For this, lacquers were formulated containing three different permeation enhancers (limonene - LIM, propylene glycol - PG, and oleic acid - AO) combined according to a mixture design with a model anti-inflammatory natural drug (naringenin) and a soluble film-former polymer (polyvinyl alcohol). Formulations were characterized by physicochemical tests and in vitro and in vivo skin permeation studies. The lacquers were stable and provided a vectorized drug release. LIM, combined with one of the other permeation enhancers, showed a synergic effect, enhancing topical skin penetration in vitro by 53% while preventing permeation to the receptor medium. The in vivo evaluation of lacquers in rodent models showed these systems could provide higher levels of drug retention in the ear (166.4 ± 14.9 µg per ear for F4 and 174.9 ± 29.3 µg per ear for F5) compared to the control (109.2 ± 16.3 µg) without allowing its permeation into the bloodstream, confirming the local drug delivery. Moreover, the anti-inflammatory activity was achieved in the animal model developed for lacquer application on the earring, obtaining inhibition of ear swelling up to 40.8% ± 2.3 compared to the untreated ear. Thus, such an innovative lacquer proved a promising vehicle for treating affections caused by adornments, enhancing skin permeation while avoiding a systemic effect.

A method for targeting a specified segment of DNA to a bacterial microorganelle.

Encapsulation of a selected DNA molecule in a cell has important implications for bionanotechnology. Non-viral proteins that can be used as nucleic acid containers include proteinaceous subcellular bacterial microcompartments (MCPs) that self-assemble into a selectively permeable protein shell containing an enzymatic core. Here, we adapted a propanediol utilization (Pdu) MCP into a synthetic protein cage to package a specified DNA segment in vivo, thereby enabling subsequent affinity purification. To this end, we engineered the LacI transcription repressor to be routed, together with target DNA, into the lumen of a Strep-tagged Pdu shell. Sequencing of extracted DNA from the affinity-isolated MCPs shows that our strategy results in packaging of a DNA segment carrying multiple LacI binding sites, but not the flanking regions. Furthermore, we used LacI to drive the encapsulation of a DNA segment containing operators for LacI and for a second transcription factor.

Kinetics of Aldehyde Flavorant-Acetal Formation in E-Liquids with Different E-Cigarette Solvents and Common Additives Studied by 1H NMR Spectroscopy.

Flavorants, nicotine, and organic acids are common additives found in the e-liquid carrier solvent, propylene glycol (PG) and/or glycerol (GL), at various concentrations. Some of the most concentrated and prevalent flavorants in e-liquids include trans-cinnamaldehyde, vanillin, and benzaldehyde. Aldehyde flavorants have been shown to react with PG and GL to form flavorant-PG and -GL acetals that have unique toxicity properties in e-liquids before aerosolization. However, there is still much that remains unknown about the effects of different e-cigarette solvents, water, nicotine, and organic acids on the rate of acetalization in e-liquids. We used 1H NMR spectroscopy to determine the first-order initial rate constant, half-life, and % acetal formed at equilibrium for flavorant-acetal formation in simulated e-liquids. Herein, we report that acetalization generally occurs at a faster rate and produces greater yields in e-liquids with higher ratios of GL (relative to PG). trans-Cinnamaldehyde acetals formed the fastest in 100% PG-simulated e-liquids, followed by benzaldehyde and vanillin based on their half-lives and rate constants. The acetal yield was greatest for benzaldehyde in PG e-liquids, followed by trans-cinnamaldehyde and vanillin. Acetalization in PG e-liquids containing aldehyde flavorants was inhibited by water and nicotine but catalyzed by benzoic acid. Flavorant-PG acetal formation was generally delayed in the presence of nicotine, even if benzoic acid was present at 2-, 4-, or 10-fold the nicotine concentration, as compared to the PG e-liquids with 2.5 mg/mL flavorant. Thus, commercial e-liquids with aldehyde flavorants containing a higher GL ratio (relative to PG), little water, no nicotine, nicotine with excess organic acids, or organic acids without nicotine would undergo acetalization the fastest and with the highest yield. Many commercial e-liquids must therefore contain significant amounts of flavorant acetals.